Cmod S6 Digilent Cmod S6: Breadboardable Spartan-6 FPGA Module
Cmod S6 Digilent Cmod S6: Breadboardable Spartan-6 FPGA Module by Digilent at Home Tools Express. MPN: 410-282. Hurry! Limited time offer. Offer valid only while supplies last. The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan-6 LX4 FPGA. The board also includes a programming ROM,
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around
a Xilinx Spartan-6 LX4 FPGA. The board also includes a programming ROM,
clock source, USB programming and data transfer circuit, power supplies,
and basic I/O devices. There are 46 FPGA I/O signals that are routed to
100-mil-spaced through-hole pins, making the Cmod S6 well-suited for use
with solderless breadboards. At just .7" by 2.6", it can also be loaded in
a standard socket and used in embedded systems. The FPGA on the Cmod S6 can
be configured in several ways - from a PC using the on-board Adept USB
interface or from the on-board Quad-SPI Flash memory. Configuration files
can be programmed using Xilinx's ISE 14.2 (or higher) development tools,
using Digilent's Adept system, or using older versions of the Xilinx tools
if Adept is also installed. Xilinx's ISE/iMPACT programming tool and
Digilent's Adept tool will recognize the board and/or FPGA when the board
is attached to a PC using a USB A to micro-B cable. Xilinx's iMPACT tool
and Digilent's Adept can both be used to program the FPGA and on-board QSPI
ROM. Please refer to the ISE and/or Adept documentation for more
information on using the configuration software.
Features & Highlights
- Small breadboard-friendly 48-pin DIP form factor board perfect for embedded systems projects
- Built around the Xilinx Spartan-6 FPGA, with 216Kbits of block RAM and 8 DSP slices
- On board user interfaces include 4 LEDs and 2 buttons
- Xilinx's iMPACT tool and Digilent's Adept can both be used to program the FPGA and on-board QSPI ROM
- Requires a USB A to micro-B USB cable for configuration (not included)
|Item Weight:||0.03 pounds|
|Item Size:||2.5 x 0.08 x 0.08 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Digilent, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By TWIN INDUSTRIES
mpn: TW-E41-1020-TWIN INDUSTRIES, ean: 5053606585100,
By Sruik Tool
Sruik Tool 100 Pcs LM336Z-2.5 TO-92 LM336 2.5V Voltage References Reference Diode Descriptions: •Parts NO.: LM336Z-2.5 •Package: TO-92 •Quantity: 100 PCS a lot •2.5V voltage references...
mpn: ZSU2G_B, ean: 0811028020235,
The CC2531 is a USB enabled true system-on-chip (SoC) solution for IEEE 802.15.4, ZigBee and RF4CE applications. It enables USB dongles or USB upgradable network nodes to be built with low total bill-of-material costs. The CC2531 combines the perform...
mpn: LE355010565, ean: 0606413034290,
Overview: This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, in FOR Ardui...
mpn: R15-AL1-QI1295, ean: 7087197419702,
5pcs High Purity 99.9% Pure Zinc Sheet Plate 140x140x0.2mm Durable For Science Lab Tools...
Line Volt Mechanical Tstat, Switch Type SPST, Switch Action Open on Rise, Number of Switches 1, Control Range -10 Degrees to 100 Degrees F, Differential 6 to 8 Degrees F, Height 5-1/2", Width 2-13/100", Depth 2-63/100", Sensor Type Bi-Metal, Features...
DAYTON 6A859 SOLID STATE TIMER 15-300 SEC. * NEW IN BOX *...
Eye Shield Kit., Bench Grinder, Construction Polycarbonate, Face Width (In.) 5.75, Length (In.) 4, Function Safety Shield, For Use With Most Bench Grinders, Includes 2 Plexi Eyeshields, 2 Lower Eyeshield Brackets and 4-10-24- X 3/8" Pan Head Screws...
sku: 4121513, mpn: 2760001, ean: 0040293646417,
By Circuit Specialists
mpn: WB-104-3+J, ean: 0723175292840,
This breadboard includes a supply of pre-cut & pre-formed jumper wires. The board area is 6.5" x 3.125 ". The ABS material is printe dwith color coordinates for faster component placement. This breadboard is solderless. Just plug in your components a...